Amici Screw Cap Replacement: 0.65–1.5 L Guide
By alfi® – Isoliergefäße der Premiumklasse | Published: 2026-10-28
Category: How-to Guides
Learn how to replace the screw cap on your alfi Amici vacuum container, including compatibility details for 0.65 L, 1.00 L, and 1.50 L sizes.
Quick Answer
To replace the screw cap on your alfi Amici container, order the chromed replacement cap designed for 0.65 L, 1.00 L, and 1.50 L models, then follow the simple steps below to ensure a proper fit and seal.
Why a Properly Sealed Cap Matters
A worn or damaged screw cap can compromise the vacuum insulation of your Amici container, leading to faster temperature loss and potential leaks. Replacing it with the correct alfi spare part restores the original performance and prevents spills during transport.
The chromed replacement cap is specifically designed for Amici models in 0.65 L, 1.00 L, and 1.50 L sizes, so you can trust it to match the original threading and sealing surface.
How to Replace the Amici Screw Cap
- Identify your Amici size: Check the base or bottom of your container for the volume marking (0.65 L, 1.00 L, or 1.50 L). The replacement cap fits all three sizes, but confirming the size helps you verify you have the correct spare part. If the marking is worn, measure the diameter of the opening to cross-check compatibility.
- Remove the old cap: Twist the old cap counterclockwise until it comes off. If it is stuck, run warm water over the cap for a few seconds to loosen it—do not use tools that could scratch the chrome finish. Inspect the old cap for cracks or deformation; if the threads are damaged, the replacement is definitely needed.
- Clean the container mouth: Wipe the rim and threads of the container with a damp cloth to remove any residue or coffee grounds. A clean surface ensures the new cap seats properly and creates an airtight seal. Let the mouth dry completely before attaching the new cap to avoid moisture buildup.
- Attach the new cap: Align the new cap with the threads and twist it clockwise until it is snug. Do not overtighten—just a firm turn is enough to create a leak-proof seal without stressing the threads. If the cap feels loose or cross-threaded, remove it and start again.
- Test for leaks: Fill the container with water, close the cap, and turn it upside down for a minute. Check for any drips. If leaks appear, remove the cap and reattach it, ensuring the threads are aligned correctly. A quick leak test after installation saves you from future spills.
Replacement Cap Overview
- Schraubverschluss, verchromt, Amici 0,65 l, 1,00 l, 1,50 l: This alfi replacement screw cap is a chromed spare part for Amici vacuum-insulated containers, offered for the 0.65 L, 1.00 L, and 1.50 L sizes. It ensures a compatible fit and reliable sealing for your specific Amici model, so you don't have to worry about mismatched threads or leaks.
Schraubverschluss, verchromt, Amici 0,65 l, 1,00 l, 1,50 l
