Dichtungsring für alte Deckelform: Passende Modelle

Quick Answer

For older alfi Kugel and Juwel models (up to 2021), you need the white sealing ring with part number 9100000009. This guide shows you how to confirm compatibility and replace the ring to stop leaks.

Step-by-Step Replacement Guide

1. Confirm Your Model and Year: Check the bottom of your alfi carafe for the model name (Kugel or Juwel) and the production year. This ring only fits models made up to 2021. If your carafe is newer, this part will not work. A common mistake is assuming all Kugel or Juwel models use the same ring. Always verify the year.
2. Remove the Old Sealing Ring: Unscrew the lid completely. Gently pry the old ring out of the groove using your fingers or a blunt plastic tool. Do not use a sharp metal object that could scratch the plastic. If the old ring is brittle, clean any debris from the groove before inserting the new one.
3. Install the New White Ring: Place the new ring (part 9100000009) evenly into the groove, pressing it down with your thumbs. Work around the circumference to ensure it sits flat without twists. A twisted ring will cause leaks. After installation, screw the lid back on and test with water before using the carafe for hot beverages.

Replacement Part Overview

• Dichtungsring alte Deckelform, weiß, Kugel/Juwel bis 2021 u.a. 0,32 l / 0,50 l / 0,75 l / 0,94 l / 1,5l: This white sealing ring is a replacement part for older alfi lid designs, identified by part number 9100000009. It fits Kugel and Juwel models up to 2021 in sizes 0.32 l, 0.50 l, 0.75 l, 0.94 l and 1.5 l, so you can restore the seal without buying a new carafe.